The last update I posted, we had just finished installing the toilet and "just" had the vanity to do. We debated right up until the last minute on whether we should put a vanity or pedestal sink in, assuming it wouldn't matter much to the other parts of our remodel. In the end, we decided on the pedestal, since a cabinet for the same price would be lower quality composite wood. We also think the pedestal makes the tiny room feel less cramped. I had read online that installing a pedestal sink was "graduate level DIY" which I sort of took as a challenge. How hard could it be, right?
Well, first of all, we had to install bracing between our wall studs behind where the pedestal would sit. Now, when we removed the old vanity, the drywall was pretty damaged and required patches in a few places. We had already patched, mudded, sanded, primed and painted the wall to make it as pretty as it could be, but now we had to open 'er back up.
I wish we had taken pictures of this step, we were both just so anxious to finally have a sink in that room (and frustrated to have to repeat work) that we forged ahead. It only took a couple hours to cut a section of drywall out between the studs, screw in a piece of 2x6 lumber, and patch the drywall back in. Then more of the long process of mudding, sanding, mudding, sanding, and painting (again!)
If you haven't done this before, the base of the pedestal is screwed into the floor, while the sink is held up by long screws that go through the back of the sink and into those aforementioned 2x6's. I had read that getting everything to line up was difficult, but this process went fairly smoothly. (Of course, we were very careful to measure, mark, and measure again before we started.) The hard part was the plumbing. Oh, the plumbing!! It took weeks and weeks along with I don't remember how many trips to three different hardware stores to finally get the plumbing to line up. Thirty-five years ago, plumbing was made from a different material than it is today and the old sink drain was in a different position from the new one and, oh yeah, you can't really see behind that pedestal while you're installing all those tees and elbows. Ugh! What a headache! (Also? Plumbers putty? Totally a steep learning curve with that stuff. After getting all the plumbing to line up, we excitedly turned on the water and got a puddle on the floor.)
But we finally figured it out. I L.O.V.E. this faucet. So much so that we special ordered the pedestal (with just one cutout) to go with it. Love.
We still had one big hurdle to jump and that's this little guy.
Why is this pipe sticking through our wall? We can't even figure out where it leads to, but it was hidden behind our old cabinet and needed to be hidden again. I took a stab at building a box to encase it, but when I was driving the nails into it, the whole thing sort of fell apart. I put the hammer away and went on strike for a few weeks. Then, the boy stepped in and worked some magic.
Add the final touches we put on a couple weeks ago, and I'm calling it done.
What did that before look like again?
Oh right. And now:
When we started this project, I don't think either of us were convinced that we would actually be able to pull it off. We went into it with the idea that we could always hire a contractor if we got in over our heads but, thankfully, that didn't happen. We did the whole thing by ourselves and every time I walk in there I'm sort of surprised and definitely proud that we did.
Oh, and do you remember the buckled wood floor that originally tipped us off to the leak in the bathroom? After months of waiting it out, the floor has dried out and shrunk back down into place. That section will probably never be the same again and a couple boards sit a little funny, but at least there's no longer any danger of someone tripping over it! A happy ending all around.